Fanatic Live: USB Infra-red Dongle won't install in Win XP Pro - Fanatic Live

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

USB Infra-red Dongle won't install in Win XP Pro Rate Topic: -----

#1 User is offline   supercow55

  • I'm getting there
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 29-May 05

Posted 29 May 2005 - 05:54 AM

hello,
I have just purchased a 'U2IrDA Mini' USB-Infrared Adapter in order to be able to connect my Sony Ericsson Cell phone to my computer and transfer files. As i purchased the dongle from a private buyer it did not come with any drivers, however i went to the manufacturer of the chip (STIR4200) inside the dongle - Sigmatel Electronics, www.sigmatel.com and downloaded the lastest driver, Version 1.32.

I then proceeded as per the instructions on the website, i unzipped the files and ran the setup program which installed files into the C:Windows directory. When this setup program had finished it instructed me to then insert the dongle into the USB port and the operating system should finish the installation.

I then inserted the dongle and windows recognised a 'USB Serial Controller' and asked me to either search for drivers automatically or specify a location. I have tried both ways because apparently windows is supposed to have a version of the driver but this did not work.

I then tried to specify a location of the driver from the files that i downloaded from the sigmatel website but it could not find any information about the drive. I have tried other older versions of the driver but it will not recognise the drivers and it just sits in the device manager with a yellow question mark because it has no drivers installed for it.

Can anyone please help me with this problem? I have been searching for some suitable drivers but have been unable to find any and i have had no reply from sigmatel either. I am also running Windows XP Professional with SP2 if that helps at all. Any help is much appreciated, Cheers Benny
0

#2 User is offline   Dody

  • Liveâ„¢ |) () |) '/
  • Icon
  • Group: Valued Members
  • Posts: 1,145
  • Joined: 26-October 04
  • Location:DK
  • Interests:Guitar, c++, Hacking, Religions, Debating...

Posted 29 May 2005 - 11:33 AM

I think you got the wrong driver maybe.... but what is the name of the hardware... post it here and i will try to find the driver for it....
0

#3 User is offline   supercow55

  • I'm getting there
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 29-May 05

Posted 29 May 2005 - 12:43 PM

hello,
The name of the dongle is a Coolgear 'U2IrDA mini' - 4Mbps FIR USB IrDA.
Any help or supplied drivers are much appreciated, Cheers Benny

This post has been edited by supercow55: 29 May 2005 - 01:40 PM

0

#4 User is offline   Dody

  • Liveâ„¢ |) () |) '/
  • Icon
  • Group: Valued Members
  • Posts: 1,145
  • Joined: 26-October 04
  • Location:DK
  • Interests:Guitar, c++, Hacking, Religions, Debating...

Posted 30 May 2005 - 03:50 PM

I searched in driverguide.com, but nothing is there....

I looked at www.sigmatel.com and found the same driver as you found.. but I read this msg, that you might consider when you install

"*This is an unsigned driver and Windows may generate a warning message. If this happens, please click on “Continue Anyway” to continue installing the driver."
0

#5 User is offline   supercow55

  • I'm getting there
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 29-May 05

Posted 31 May 2005 - 07:19 AM

hello dody,
yes i realise it is an unsigned driver and i have always pressed 'continue anyway' when installing and it still will not recognise the drivers as anything to do with the the device - USB Serial Controller. Any more help or suggestions are much appreciated, I really want to rectify this problem and resent a message to the manufacturer with still no reply, Cheers Benny
0

#6 User is offline   Dody

  • Liveâ„¢ |) () |) '/
  • Icon
  • Group: Valued Members
  • Posts: 1,145
  • Joined: 26-October 04
  • Location:DK
  • Interests:Guitar, c++, Hacking, Religions, Debating...

Posted 31 May 2005 - 08:31 AM

oki.. I connect my nokia to the pc, but I need "Nokia PC Suite" to make it working, it can't be working without the suite... so do you have one for yours? otherwise I think you must have it....
0

#7 User is offline   supercow55

  • I'm getting there
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 29-May 05

Posted 31 May 2005 - 08:48 AM

hello,
yes, my phone is a Sony Ericsson, and i do have the software installed on my computer. However until i find some proper drivers that work with this device and make it finalise the install the sony ericsson software will not recognise any type of connection. I have to get the device working in windows before i think about utilising any type of phone software. Thanks again for another thing to try, hopefully i will get this problem fixed soon, Cheers Benny
0

#8 User is offline   Dody

  • Liveâ„¢ |) () |) '/
  • Icon
  • Group: Valued Members
  • Posts: 1,145
  • Joined: 26-October 04
  • Location:DK
  • Interests:Guitar, c++, Hacking, Religions, Debating...

Posted 31 May 2005 - 09:27 AM

try to remove the hardware, uninstall the driver and install it again!
0

#9 User is offline   supercow55

  • I'm getting there
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 29-May 05

Posted 31 May 2005 - 09:33 AM

i have also tried that, but that also will not make any difference, Cheers Benny
0

#10 User is offline   Dody

  • Liveâ„¢ |) () |) '/
  • Icon
  • Group: Valued Members
  • Posts: 1,145
  • Joined: 26-October 04
  • Location:DK
  • Interests:Guitar, c++, Hacking, Religions, Debating...

Posted 31 May 2005 - 09:59 AM

what a nice hardware lol... try to contact them and explain your problem.. it could be that the problem is from the driver it self not from your pc or your installtion!
0

#11 User is offline   supercow55

  • I'm getting there
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 29-May 05

Posted 31 May 2005 - 10:06 AM

yeah i'm wishing i hadn't bought this particular piece of hardware. I have tried contacting through e-mail both sigmatel (the company who manufactures the chip inside) and Coolgear (company that manufactures outside end product) but so far no response. Hopefully they will get back to me soon, Thanks for all your help, Cheers Benny

This post has been edited by supercow55: 31 May 2005 - 10:07 AM

0

#12 User is offline   supercow55

  • I'm getting there
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 29-May 05

Posted 03 June 2005 - 05:12 AM

hello,
The problem has been solved, the USB IrDA dongle has finally installed. I was recommended to try the drivers from http://ds2.my-mam.co...MA620driver.zip and they worked. So much for help from the manufacturer, they never even returned any of my e-mails. But im just glad its all working now and would like to thanks everyone who offered their help and suggestions. Cheers Benny
0

#13 User is offline   Dody

  • Liveâ„¢ |) () |) '/
  • Icon
  • Group: Valued Members
  • Posts: 1,145
  • Joined: 26-October 04
  • Location:DK
  • Interests:Guitar, c++, Hacking, Religions, Debating...

Posted 03 June 2005 - 08:53 AM

yeah I was feeling that it is from the driver... anyway good that it works now, enjoy it ;)
0

#14 User is offline   ibelta

  • One post hero!
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 13-June 08

Post icon  Posted 13 June 2008 - 08:57 AM

Hello supercow55 or anyone else :o , I have same problem but this website is not working anymore.
Can someone please email the file (maybe zip) to my email
genericjunkmail@gmail.com
Many thanks

Ibelta


View PostDody, on Jun 3 2005, 08:53 AM, said:

yeah I was feeling that it is from the driver... anyway good that it works now, enjoy it ;)

0

#15 User is offline   sasaaa

  • One post hero!
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 04-March 09

Posted 04 March 2009 - 01:59 PM

View Postibelta, on Jun 13 2008, 09:57 AM, said:

Hello supercow55 or anyone else :o , I have same problem but this website is not working anymore.
Can someone please email the file (maybe zip) to my email
genericjunkmail@gmail.com
Many thanks

Ibelta



I have the same problem, is there a new link from where we can download the driver?
or can someone send it to me please (samir23@aliceadsl.fr).

Thank you.
0

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users